Types

Dry : SMT16B   

Submerged : SMIT16B

Models

20 - 25 - 32 - 40 - 45 - 55 - 60 - 70 - 80 - 90 - 110 - 125 - 150 - 180

Installation

Free for SMT16B

Submerged (totally or partially) for SMIT16B 

Foot mounted for model 125 and up

Flanges

ISO 3019/2

Connections

SAE 3000 - BSPP

Drive loading

No axial or radial loads

Shaft rotation

Clockwise (from shaft end) , (suitable also for counter clockwise rotation) I

Flows

From 4 up to 3.200 L/min (for model 20 to 110) - From 1.700 up to 4.900 L/min (for model 125 and up) I

Outlet Pressure

Up to 40 bar

Inlet Pressure

Min. -0.7 bar max. 3 bar(2) I

Fluids(3)  I

• Mineral oil HLP e HLVP
• Ecologic fluids HETG, HEPG, HEE
• Synthetic fluid or emulsion: HFA oil-water emulsion, HFB water-oil emulsion 40% of volume, HFC water/ glycole – water max 35 to 55%, HFDR phosphate ester
• Lubrication high viscosity oils
• Special synthetic fluid: MIL-H, SKYDROL,
• Fuel oil: MGO, MDO, Low sulfur MDO and HFO
• DMX (ISO8217), DMA, DMB, DMC, DMZ
• Bunker oil, furnace oil, engines oil, heating oil, hydraulics oils DIN 51524

Viscosity

From 2 up to 10.000 cSt(4) I

Seals polymer (shaft, O-ring) I

NBR, FKM, EPDM (5) I

Seal type

TM, TMK, TMZ, FGM

Acoustic Emissions

From 52 up to 68 db(A) at 2.950 rpm value based on ISO 4412 test procedure

Pump Body

Aluminum alloy

Pump body (special applications) I

Cast iron, steel. Hardened steel and stainless steel available on request

Screws

Steel for main screw , idler cast iron

Screws (special applications) I

Core hardened steel screws, surface treated screws

Environment Temperature(6) I

From - 50 ° up to + 100°C

Hydraulic Temperature(6) I

From - 50° C up to + 300° C

Filtration

Permissible degree of fluid contamination NAS to 1638 class 10 or ISO DIS 4406 – 19/16. Recommended filtration ß 25 ≥ 75(6)For higher/lower temperature please contact Settima.